STAC-N1™ Benchmarks prove Metamako latency is barely detectable

Sydney and New York - 7 April 2014

Australian-based Metamako, supplier of ultra-low latency devices to exchanges and the trading community, has announced the results of STAC-N1 Benchmarks carried out by the Securities Technology Analysis Center LLC (STAC®).

STAC tested two systems that were identical except for what connected the servers. In the first test, the servers were connected by daisy chaining ports on three MetaConnect 16 switches, resulting in 48 total switch hops for each roundtrip message. In the second test, the servers were connected by the same cables as the first system linked together by simple LC couplers rather than a switch. The test results showed that the mean per-hop latency of the MetaConnect 16 device was undetectable at the base rate of 100,000 messages per second and only 2 nanoseconds at the maximum rate tested of 600,000 messages per second.  The STAC Reports™ for the two systems are available online.

Metamako’s MetaConnect switch, launched in December 2013, is unique in combining ultra-low-latency performance with high levels of functionality which are usually only available on much slower devices. In benchmark tests it demonstrated excellent deterministic latency.

The well-regarded, industry-standard benchmark uses the STAC-N1 Test Harness, which simulates the conditions in a typical trading network using data from US equities order-book feed handlers.

Scott Newham, co-Founder at Metamako, explains: “Although in real life we would only expect to see one or two hops, the latency on MetaConnect 16 was so low that we had to put it through 48 hops to be able to measure the latency. The fact that the device is able to handle such a large number of hops means that its signal recovery capabilities are excellent. This in turn means that when MetaConnect is used over long distances the performance is exceptionally good, with the latency remaining close to zero.”

The key benefits of using Metamako’s MetaConnect switch are:

  • Improved trading performance – the very low latency allows this device to be installed where other devices cannot be used because of concerns over the performance impact of those other devices.
  • The determinism means that the speed of every trade is consistent and predictable, achieving absolutely the best performance possible.
  • Exchanges can be certain that market data is delivered to all the clients at the same time, ensuring a level playing field.

Newham adds: “We are very pleased with the benchmark results, which demonstrate the exceptional performance of MetaConnect 16. We are confident that our performance will not be beaten in a meaningful way any time soon. ”

Having 16 ports on the device lowers the cost per device, making MetaConnect 16 an attractive proposition for customers who only need a small number of ports, because they are, for example, using MetaConnect as a kill switch. Customers who need more ports will be able to purchase MetaConnect 48 – a very closely related design, with similar latency and 48 ports.

In addition to extreme low latency, the key features of MetaConnect include: packet statistics for diagnostics and troubleshooting; functionality for remote rewiring; network taps for splitting signals such as market data, without adding latency or compromising signal quality.

MetaConnect allows users to replace a significant number of devices in their server rack (patch panels, taps, signal regenerators, media converters and switches) with a single intelligent box which has negligible latency. Each of these devices introduces latency overheads, possible points of failure and ties up valuable rack space (as well as adding significant costs).

Become a bobsguide member to access the following

1. Unrestricted access to bobsguide
2. Send a proposal request
3. Insights delivered daily to your inbox
4. Career development